Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
If you have concerns about your privacy?
Read our Privacy Policy.

TEAK OIL
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Coverage 12-15 m2/L
-
Drying Time 3 Hours
-
Coats 1
-
Protects Wood
-
Ready to Use
Product Description
VIVECHROM’s TEAK OIL is a specially selected mixture of oils combined with wax, used mainly for maintaining and refreshing the hard wood such as teak, mahogany, iroko, as well as all the bare wood. It is absorbed into the wood saturating its pores without forming a film and it is water repellent. It revives and brings out the natural colour and texture of wood which has been worn out due to weather or use conditions. It is ideal for garden and interior unvarnished furniture as well as for wooden decorative objects.
Application Description
Apply with Cloth, Brush
Health & Safety
- vv_gr_en_teak_oil.pdf
- tds-teak-oil-en.pdf
Tips & Advice
-
1. Preparing the SurfacesSurfaces must be clean and dry, unvarnished and free from dust, grease, and resin. Treatments such as dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet sanding/flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment.
-
2. StoringStore between 5oC to 40oC.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.