DULUX TRADE ULTRA GRIP PRIMER

Size
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Drying Time Touch Dry: At 20ºC – 4 -6 hours
  • Coats 1
Product Features
  • Excellent adhesion on problem surfaces
  • For wall tiles, glass, laminate

Product Description

DULUX TRADE ULTRA GRIP PRIMER is a water-based two-pack primer, specially formulated to provide excellent adhesion for subsequent coats of paint, when applied to difficult substrates such as glazed ceramic wall tiles, laminates, glass, anodised aluminium, powder-coated steel and stove enamel surfaces. Suitable for interior and exterior use. Compatible with Dulux Trade paint systems.

Application Description

STIR THOROUGHLY BEFORE USE. Apply 1 coat of Dulux Trade Ultra Grip Primer, and then finish with an appropriate Dulux Trade paint system.
Mixing Ratio: supplied in correct proportions. Add all of the Activator to the Base container and mix thoroughly for at least 5 minutes, until the product is smooth and even. Do not mix part units. Badly activated or incorrectly mixed materials will affect performance and may cause early failure or discolouration.
Pot life: up to 2 hours at 20°C.

Health & Safety

  • dt_gb_en_ultra_grip_primer_basesds.pdf
  • dt_gb_en_ultra_grip_primer_activatorsds.pdf
  • dt_ultra_grip_primer_leaflet_low_res.pdf
  • dulux_trade_ultra_grip_tds_final.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry) and free from all loose or powdery material using a stiff fibre brush. Where necessary, thoroughly degrease, followed by rinsing with fresh, clean water.
    Thoroughly rub down previously painted surfaces, using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth.
    Spot prime bare metal and metal fixings with 1 coat of Metalshield Zinc Phosphate Primer from Dulux Trade.
    It is recommended that a small test area is
    applied before treating the entire surface to
    ensure compatibility.
  • 2. Cleaning
    After use, remove as much product as possible from equipment before cleaning with water. When this paint container is empty please ask your stockist about recycling. If you have leftover paint, please dispose of it responsibly.
  • 3. Storing
    Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright. Store between 5oC to 35oC.
Vivechrom Visualizer app