No Colour SelectedSelect a colour
DULUX TRADE SATINWOOD
Solvent Based Satin Finish for Interior Wood & Metal
Do you know the area?
Coverage ≈ 17 m²/L
Drying Time 4-6 Ηours. Drying time depends on weather conditions (humidity, temperature)
DULUX TRADE SATINWOOD is a Solvent-based satin finish formulation that is tough, hardwearing and dirt resistant. Does not require an undercoat except where a strong colour change is required. Suitable for use on interior wood and metal surfaces.
Health and safety
406 DT TDS SATINWOOD.pdf
Tips & Advice
Preparing the Surfaces
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as dirt, grease and wax. New or bare surfaces should be primed with an appropriate Dulux Trade primer. Thoroughly rub down previously painted surfaces,using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Store between 5° and 40° C.