Undercoat for Emulsion Paints
Do you know the area?
Coverage ≈ 15 m²/L
Drying Time 2 Hours
ASTARI PLASTIKON is a water based undercoat for emulsion paints. It has very good adhesion, hardness and elasticity as well as great resistance to alkaline surfaces. It provides a uniform matt surface to the finish coat.
Reinforces Adhesion & Durability of the End Coat
Resistance to Alkaline Surfaces
Health and safety
Tips & Advice
Preparing the Surfaces
Surfaces must be clean, dry and free from all defective and poorly adhering material, dirt, grease and salts. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet sanding/flatting should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. To fill and coat the surfaces, use NEOPAL STUCCO.
Store between 5° το 40° C.